RecyClass Certification: recyclability, recycled content and traceability
A practical English guide to RecyClass Recyclability Certification, Design for Recycling Guidelines, Evaluation Protocols and controlled-blending traceability.
What RecyClass actually evaluates
RecyClass is often mentioned in sustainability specifications as if it were a single label. In practice, RecyClass provides several related assessment routes. The correct route depends on whether a company wants to demonstrate the recyclability of finished packaging, the compatibility of a semi-finished component, the performance of a recycling process, or the percentage and traceability of recycled plastic in a product.
RecyClass Recyclability Certification evaluates plastic packaging against the waste-management chain: collection, sorting, recycling, and the ability to reuse the resulting recycled material in the original application . That scope makes it different from a material declaration or a recycled-content certificate.
The four decisions a technical team should make first
1. Is the object finished packaging?
If the answer is yes, start with the Recyclability Certification route. The final package should include the features that will enter the collection and recycling system: the main body, closure, label, adhesive, ink, coating, sleeve, decoration and other relevant components.
The certification is geographical. RecyClass guidance describes it as a country-specific quantitative assessment that considers collection schemes and the effective availability of sorting and recycling infrastructure in the audited area . A claim therefore needs to reflect the certificate’s country or group-of-countries scope.
2. Is the object semi-finished packaging?
A Letter of Compatibility reports an intermediate result for semi-finished packaging. It may be useful when a converter or packaging supplier needs a B2B assessment before a brand owner adds its final label, artwork or product-related elements. It is not the same as a final-packaging certificate, and RecyClass guidance prohibits using the RecyClass logo at this stage .
3. Is the object a recycling site or process?
Recycling Process Certification is designed for recyclers. It verifies traceable waste origin, responsible management and the conversion of waste into new raw material. It is issued for a recycling process or processes at a site and is connected to a list of certified outputs . It should not be presented as proof that an individual package is recyclable.
4. Is the claim about recycled content?
Recycled Plastics Traceability Certification applies to actors such as compounders, converters, producers and traders. It verifies traceability across the process and the stated percentage of recycled plastic in products, components or compounds . This is the relevant route for a claim such as “contains 60% recycled plastic,” provided that the percentage, source and product scope are supported by the certificate.
How Design for Recycling Guidelines support package development
RecyClass develops sector-specific Design for Recycling Guidelines to determine whether product features are compatible with a given recycling stream. The Guidelines are updated using evidence from RecyClass Testing Campaigns and Technology Approvals .
For packaging, the traffic-light structure is practical for design reviews:
- Green / full compatibility: preferred features that best support recyclability and recyclate quality.
- Yellow / limited compatibility: tested or known features that may have a limited impact on the process or recyclate quality.
- Red / non-compatibility: detrimental or disqualifying features that should be avoided .
The Guidelines cover different streams, including PET bottles, PET thermoforms, PE films, PP films, HDPE containers and tubes, PS containers, and PP containers and tubes . A team should always select the guideline for the actual stream rather than applying a generic “plastic packaging” assumption.
Materials, structures, labels, adhesives and inks
Materials
Record the main polymer, secondary polymers, additives, pigments, colour, recycled content and mass fraction. A familiar polymer name is not enough to establish compatibility; the relevant question is how the whole package behaves in its target stream.
Structures
Describe multilayer structures layer by layer, including thickness, tie layers, barrier layers and adhesive systems. The technical file should show which layer performs which function and how the finished structure is made. If a technology is not addressed by the applicable Guideline, it should be treated as an open technical question rather than assumed to be acceptable.
Labels and closures
Labels, sleeves, caps, pumps, liners and seals should be documented separately. RecyClass packaging guidance explicitly supports checking features such as caps, labels and adhesives against the relevant recycling stream . The assessment should therefore use the commercial configuration, not only an unlabelled laboratory body.
Inks and coatings
List ink chemistry, coverage, varnish, coating, metallic effects, foils and decorative processes. These details can influence sorting, washing, separation or the quality of the recyclate. A change in ink supplier or coating formulation should go through change control when it could affect the assessed configuration.
What to do when a feature is not in the Guideline
RecyClass provides Recyclability Evaluation Protocols for features that are not yet covered by the Design for Recycling Guidelines . The protocols use scientific testing methods to assess compatibility with plastic recycling processes. A positive evaluation may support a Technology Approval.
A disciplined route is:
- Define the feature, polymer stream and intended application.
- Prepare a representative sample with the actual composition, thickness, coverage and processing conditions.
- Confirm the applicable Evaluation Protocol with a recognised Testing Facility.
- Conduct independent testing and retain the full report.
- Follow the technical review route for a Technology Approval when applicable.
- Use the result only for the technology, product and scope covered by the approval.
A Technology Approval is not a universal approval for every packaging design that uses a similar marketing name. The specific formulation, construction, application and conditions matter.
Recycling Process Certification and controlled-blending traceability
RecyClass states that the Recycling Process Certification scheme is aligned with EN 15343:2007 and the ISO 22095:2020 controlled blending model . The same standards alignment is described for Recycled Plastics Traceability Certification .
The controlled-blending model is a chain-of-custody approach. The organisation controls the identified recycled input, blending or allocation rules, output quantities and the products to which a recycled-content percentage is assigned. It is not a claim that each molecule can be tracked to one final article. It is a controlled physical accounting model that supports a stated percentage within the certified scope.
For an audit-ready system, control at least:
- The origin and classification of incoming recycled material.
- Supplier and delivery records.
- Batch or lot identification.
- Weighing and stock records.
- Formulations and blending instructions.
- Production output and yield.
- The recycled percentage assigned to each product.
- Nonconforming material and rework treatment.
- Product lists and approved claim wording.
The Recycling Process Certification can serve as origin evidence for Recycled Plastics Traceability Certification, which creates a practical link between a certified recycling site and a downstream product claim .
Implementation process
A — Define the intended statement
Write the target statement before collecting documents. “Recyclable packaging” and “contains X% recycled plastic” are separate statements and require different evidence.
B — Define the market scope
List countries, collection assumptions and target recycling streams. Do not generalise a country-specific Recyclability Certification into a global claim.
C — Capture the bill of materials
Include polymer, mass, colour, additives, structure, labels, adhesives, inks, coatings, closures and product residue where relevant.
D — Compare with the Guidelines
Use the correct sector and packaging stream. Record green, yellow and red features and the version of the Guideline used.
E — Escalate uncovered features
Use a Recyclability Evaluation Protocol where a new material or feature is not covered. Keep the test plan and sample definition under document control.
F — Fix the assessment route
Finished packaging: Recyclability Certification. Semi-finished package: Letter of Compatibility. Recycling site: Recycling Process Certification. Recycled-content claim: Recycled Plastics Traceability Certification.
G — Generate representative samples
Submit the configuration that will be sold or supplied. Do not remove the very components that may influence sorting or recycling.
H — Have an independent assessment
Recognised Certification Bodies or Testing Facilities provide the independent review expected by the schemes. Retain the audit report, test report, certificate code and scope.
I — Investigate findings
Treat a yellow or red feature as a design decision requiring evidence, mitigation or a revised construction. Do not solve a technical finding only by rewriting marketing copy.
J — Issue controlled claims
Match every claim to the certificate, product list, geographic scope, percentage or class and intended audience.
K — Maintain the system
Monitor updates to Guidelines, Evaluation Protocols, Technology Approvals and audit schemes. Reassess when the package, supplier, formulation, process or market changes.
Evidence package for an audit
A packaging submission should normally include a technical drawing, bill of materials, polymer identification, layer structure, component weights, label and adhesive specification, ink and coating information, production process, samples, supplier declarations, test reports, intended countries and draft claims.
A recycling-site submission should document the site, input waste, source, sorting, washing, grinding, extrusion or other process steps, output materials, management controls, mass records and traceability procedures.
A recycled-plastics traceability submission should connect incoming recycled material to certified products. It should include source documentation, pre-consumer or post-consumer classification, purchase and delivery records, formulations, production data, allocation calculations, product lists and claim controls.
The strongest evidence is not the largest folder. It is the evidence chain that clearly connects the material, the process, the assessed sample and the public statement.
Claims and disclaimers
RecyClass’s Use of Claims Guidance emphasises claims that are clear, honest and not misleading. It advises against vague expressions such as “environmentally friendly,” “sustainable” or “green product” when they do not explain the relevant attribute. For recycled plastic, the percentage and relevant source should be stated rather than hidden behind a generic phrase .
For Recyclability Certification, claims should identify the certified packaging and stay within the geographic scope. For Design for Recycling claims, communication should explain that the assessment concerns European sorting and recycling practices and does not itself account for each national collection system . For Recycling Process Certification, communication is primarily B2B and relates to the certified site or process. For Recycled Plastics Traceability Certification, the statement should match the certified product and recycled-content percentage.
A certification mark should never be placed next to an unrelated product or used in a way that suggests a broader environmental endorsement than the certificate provides.
FAQ
Does a positive Design for Recycling assessment prove that packaging is collected everywhere?
No. RecyClass explains that Design for Recycling assessment does not consider the collection specificities of each country. Collection and local disposal instructions remain a separate matter .
Is a Letter of Compatibility enough for a consumer-facing claim?
No. It is an intermediate assessment for semi-finished packaging and is intended for B2B communication. Final packaging should be submitted for the relevant certification; the RecyClass logo is not permitted at the Letter stage .
Can a recycler use a Recycling Process Certificate to claim that all plastic is recycled?
No. The certificate applies to the audited process and certified outputs. It does not justify an unlimited claim for all materials or all products.
Does traceability certification prove that packaging is recyclable?
No. It verifies recycled-content traceability and percentage. Packaging recyclability requires the appropriate packaging assessment.
Does a food-contact module automatically approve a recycled plastic for food contact?
No. RecyClass’s claims guidance warns that the relevant module is not itself proof of food-contact approval or full compliance with the applicable regulation .
How often should a company review its evidence?
At every relevant design, supplier, formulation, process or market change, and whenever RecyClass revises a Guideline, Protocol or audit scheme. The certificate’s validity and conditions remain controlling.
Call to action
Start with a one-page scope statement: product, stream, countries, intended claim and evidence owner. Then build the technical file around the actual commercial configuration. This prevents the common failure mode in which a company has a recycled-content certificate, a material test or a supplier letter but no evidence for the claim it wants to print on the package.
References
: https://recyclass.eu/certifications/recyclability/ “RecyClass Recyclability Certifications”
: https://recyclass.eu/protocols-guidelines/design-for-recycling-guidelines/ “RecyClass Design for Recycling Guidelines”
: https://recyclass.eu/protocols-guidelines/design-for-recycling-guidelines/packaging/ “RecyClass Packaging Design for Recycling Guidelines”
: https://recyclass.eu/certifications/recycling-process/ “RecyClass Recycling Process Certification”
: https://recyclass.eu/certifications/recycled-plastic-traceability/ “RecyClass Recycled Plastics Traceability Certification”
: https://recyclass.eu/wp-content/uploads/2025/11/RecyClass-Use-of-Claims-Guidance.pdf “RecyClass Use of Claims Guidance”
: https://recyclass.eu/faq/ “RecyClass FAQ”
Contact us for RECYCLASS Standard consulting services in Vietnam
ISC Global
Hotline/Zalo: +84 933 096 426 – +84 868 591 260
Email: info@iscglobal.asia | van.pham@iscglobal.asia
Website: iscglobal.asia | iscglobal.edu.vn






No responses yet